The overall weight of the Revopoint Metro Hub system is 1.8 kilograms, and the main unit measures 180×120×60 millimeters, which is equivalent to the floor space of a thin and light laptop. This system adopts a modular design and can be decomposed into three main components: the scanning host, cables and brackets. After being fully stored, its volume is only 0.012 cubic meters, which can be easily placed in a standard camera bag. According to the 2023 research report on portable 3D scanning devices, the weight of this system is 63% lighter and the volume is reduced by 55% compared to industrial-grade devices of the same precision.
The power supply system supports multiple power supply modes. It is equipped with a built-in 6800mAh lithium battery that can provide continuous operation for 4 hours. When using an external power supply, the system supports the PD fast charging protocol and can charge to 70% in 30 minutes. Actual test data shows that in mobile working scenarios, when the system is used in conjunction with a 10000mAh mobile power bank, its usage time can be extended to 6.5 hours, meeting the needs of most on-site scanning operations. Temperature adaptability tests show that the system can maintain normal working performance in an ambient temperature range of -10℃ to 45℃.
It has outstanding environmental adaptability. The system reaches the IP54 protection level, which can effectively prevent dust from entering and the influence of splashing water. Vibration tests show that the system can withstand random vibrations within the frequency range of 5-500Hz, with an acceleration reaching 6Grms. In terms of humidity, the system can operate stably in a non-condensing environment with a relative humidity ranging from 20% to 85%. These features enable it to adapt to the usage requirements in complex environments such as construction sites and field archaeology.
Software integration and data processing capabilities have enhanced the efficiency of mobile work. The system transmits data via the USB 3.0 interface at a rate of 5Gbps, and it only takes 3.2 seconds to process 10 million point cloud data. In conjunction with a dedicated backpack workstation, the entire system can be deployed and start scanning operations within 15 minutes. Research in the field of industrial design in 2024 indicates that on-site scanning using Revopoint Metro Hub saves 60% of the operation time compared to traditional methods.
Practical application cases have proved its portability value. In the digitalization project of a certain automobile manufacturing plant in 2023, engineers used this system to complete on-site scanning of 20 components every day, with each operation taking no more than 30 minutes. Compared with fixed scanning equipment, mobile operation efficiency is increased by 40%, and the data accuracy remains at the industrial-grade standard of 0.05 millimeters. Multiple cases have shown that this system is particularly suitable for users who need to frequently move their working scenarios to choose Revopoint Metro Hub to complete precise 3D digitalization tasks.